Loading ...
Loading ...
Loading ...
Title Going Diving
Identifier GUID-F5BB5FFC-1071-4C7B-9968-2B2D985C4574
Language EN-US
Description
Version 7
Revision 7
Changes Changed title and moved task result info into steps.
Status Released
Last Modified 10/02/2022 13:11:47
Author cozmyer
Going Diving
1 From the watch face, press START.
2 Select a dive mode (Dive Modes, page 9).
3 If necessary, press UP to edit the dive settings, such as the gases, water type, and alerts (Dive Setup,
page 10).
4 Wait with your wrist out of the water until the watch acquires GPS signals and the status bar is filled
(optional).
The watch requires GPS signals to save your dive entry location.
5 Press START until the primary dive data screen appears.
6 Descend to start your dive.
The activity timer starts automatically when you reach a depth of 1.2 m (4 ft.).
NOTE: If you start a dive without selecting a dive mode, the watch uses the most recently used dive mode
and settings, and your dive entry location is not saved.
7 Select an option:
• Press DOWN to scroll through the data screens and dive compass.
TIP: You can also double tap the watch to scroll through the screens.
• Press START to view the in-dive menu.
8 When you are ready to end the dive, ascend to the surface.
9 Keep your wrist out of the water so the watch can acquire GPS signals and save your dive exit location
(optional).
10 Select an option:
• For a Single-Gas, Multi-Gas, CCR, or Gauge dive, wait for the End Dive Delay timer to count down.
NOTE: When you ascend to 1 m (3.3 ft.), the End Dive Delay timer begins counting down (Dive Setup,
page 10). You can press START, and select Stop Dive to save the dive before the timer elapses.
• For an Apnea or Apnea Hunt dive, press BACK, and select .
The watch saves the dive activity.
TIP: You can view your diving history in the dive log glance (Viewing the Dive Log Glance, page 31).
24 Diving
Loading ...
Loading ...
Loading ...