Loading ...
Loading ...
Loading ...
Starting Up
CVP-701 Owner’s Manual
18
1 Turn down the [MASTER VOLUME] dial to “MIN.”
2 Press the [P] (Standby/On) switch to turn the power on.
The display and the power indicator located below the left end of the keyboard lights up. Adjust
the volume as desired while playing the keyboard.
3 Press and hold the [P] (Standby/On) switch for about a second to turn the
power off.
CAUTION
Even when the [P] (Standby/On) switch is in standby status, electricity is still flowing to the instrument at the minimum
level. Remove the electric plug from the outlet when the instrument is not to be used for extended periods of time, or during
electrical storms.
NOTICE
While recording or editing, or while a message is displayed, the power cannot be turned off even if you press the [P]
(Standby/On) switch. If you want to turn off the power, press the [P] (Standby/On) switch after recording, editing, or after the
message has disappeared. If you need to force-quit the instrument, hold down the [P] (Standby/On) switch for longer than
three seconds. Note that the force-quit operation might cause data loss and damage to the instrument.
Auto Power Off function
To prevent unnecessary power consumption, this instrument features an Auto Power Off function that
automatically turns the power off if the instrument is not operated for a specified period of time. The
amount of time that elapses before the power is automatically turned off is approximately 30 minutes by
default; however, you can change the setting.
NOTICE
Any data which is not saved via the Save operation will be lost if the power automatically turns off. Make sure to save your data before this
happens.
Turning On/Off the Power
The power indicator
lights up.
Loading ...
Loading ...
Loading ...