Loading ...
Loading ...
Loading ...
CVP-701 Owner’s Manual
118
When playing back a Song, some
channels do not play.
Playback of these channels may be set to “OFF.” Turn playback ON for those
channels that are set to “OFF” (page 75).
The Guide lamps do not light during
Song playback, even after pressing
the [GUIDE] button.
Any notes outside of the 88-key range cannot be indicated by the Guide lamps.
The Guide lamps light an octave or
two lower/higher than the actual
pitch.
The Guide lamps sometimes light an octave or two lower/higher than the actual
pitch depending on the selected Voice.
The tempo, beat, measure and music
notation are not displayed correctly.
Some Song data for the instrument has been recorded with special “free tempo”
settings. For such Song data, the tempo, beat, measure and music notation will
not be displayed correctly.
USB Audio Player/Recorder
When recording an audio file, an
error message appears and the
recording is aborted.
Make sure to use a compatible USB flash drive (page 106).
Make sure that the USB flash drive has enough memory (page 107).
If you are using a USB flash drive to which data has already been recorded, check
first that no important data remains on the device, then format it (page 107) and try
recording again.
Audio files cannot be selected. The file format may not be compatible with the instrument. The only compatible
format is WAV. Also, DRM protected files cannot be played back.
Recorded file is played back at a
different volume compared to when it
was recorded.
The audio playback volume has been changed. Setting the volume value to 100
plays back the file at the same volume as when it was recorded (page 86).
Microphone
The microphone input signal cannot
be recorded.
The microphone input signal cannot be recorded by MIDI recording. Record by
Audio recording (page 88).
Mixing Console
The sound seems strange or different
than expected when changing a
rhythm Voice (drum kit, etc.) of the
Style or Song from the Mixer.
When changing the rhythm/percussion Voices (drum kits, etc.) of the Style and
Song from the VOICE parameter, the detailed settings related to the drum voice
are reset, and in some cases you may be unable to restore the original sound. In
such cases, you can restore the original sound by selecting the same Style or
Song again.
Pedal/AUX Pedal
The damper, sostenuto and soft
functions do not work for the relevant
pedals.
The pedal cord plug is not connected. Securely insert the pedal cord plug into the
proper jack (page 114).
Make sure that each pedal is properly assigned to SUSTAIN, SOSTENUTO, and
SOFT (page 23).
The on/off setting of the footswitch
connected to the AUX PEDAL jack is
reversed.
Turn the instrument’s power off, then turn it on again without pressing the
footswitch.
The damper pedal has little effect. The damper pedal was pressed when the power was turned on. This is not a
malfunction; release the pedal and press it again to reset the function.
AUX IN jack
Sound input to the AUX IN jack is
interrupted.
The output volume of the external device connected to this instrument is too low.
Increase the output volume of the external device. The volume level reproduced
via this instrument’s speakers can be adjusted by using the [MASTER VOLUME]
control.
Song
Loading ...
Loading ...
Loading ...