Loading ...
Loading ...
Loading ...
CVP-701 Owner’s Manual
114
2 Attach B.
1 Align the holes on the upper side of B with the
bracket holes on D and E, then attach the upper
corners of B to D and E by finger-tightening two
screws G.
2 Secure the bottom end of B using four screws H.
3 Securely tighten the screws G on the top of B that
were attached in Step 2- 1.
3 Mount A.
Be sure to place your hands at least 15 cm from
either end of the main unit when positioning it.
4 Secure A.
1 Adjust the position of A so that the left and right
ends of A will project beyond D and E equally as
shown in the illustration.
2 Attach A using six screws J.
5 Connect the pedal cord and power cord.
1 Insert the pedal cord plug into the pedal
connector.
2 Attach the cord holders to the rear panel as
shown, then clip the cord into the holders.
3 Use a vinyl tie to take up any slack in the pedal
cord.
4 Plug the power cord into the power connector.
CAUTION
• Be extra careful not to drop or let your fingers be
pinched by the main unit.
• Do not hold the main unit in any position other than the
position specified above.
D
B
E
13
G
2
H
A
Align the screw holes.
15 cm or further in
Insert the pedal cord securely
until the metal part of the cord
plug disappears from view.
Otherwise, the pedal may not
function properly.
1
A
A
2
J
DD
EE
PEDAL
3
2
4
1
Loading ...
Loading ...
Loading ...