Loading ...
Loading ...
Loading ...
CVP-701 Owner’s Manual
116
Troubleshooting
Overall
A click or pop is heard when the
power is turned on or off.
Electrical current is being applied to the instrument. This is normal.
The power is automatically turned off. This is normal and due to the Auto Power Off function. If necessary, turn the
function off (page 18).
Noise is heard from the instrument’s
speakers.
Noise may be heard if a mobile phone is used near the instrument or if the phone
is ringing. Turn off the mobile phone, or use it further away from the instrument.
Noise is heard from the instrument’s
speakers or headphones when using
the instrument with an application on
an iPhone/iPad.
When you use the instrument along with the application on your iPhone/iPad, we
recommend that you set “Airplane Mode” to “ON” on your iPhone/iPad in order to
avoid noise caused by communication.
In the LCD, there are some specific
points that are always lit or unlit.
These are the result of defective pixels and occasionally occur in TFT-LCDs; they
do not indicate a problem in operation.
Mechanical noise is heard during
performance.
The keyboard mechanism of this instrument simulates the keyboard mechanism of
an actual piano. Mechanical noise is also heard on a piano.
There is a slight difference in sound
quality among different notes played
on the keyboard.
This is normal and is a result of the instrument’s sampling system.
Some Voices have a looping sound.
Some noise or vibrato is noticeable
at higher pitches, depending upon
the Voice.
The overall volume is too low or no
sound is heard.
The master volume may be set too low. Set it to an appropriate level with the
[MASTER VOLUME] dial.
All keyboard parts are set to off. Use the PART ON/OFF [RIGHT 1]/[RIGHT 2]/
[LEFT] button to turn it on.
The volume of the individual parts may be set too low. Raise the volume in the
BALANCE display (page 68).
Make sure the desired channel is set to ON (pages 67, 75).
Headphones are connected, disabling the speaker output. Unplug the
headphones.
Make sure that the Speaker parameter is set to ON in the Utility display
(page 100). For details, refer to the Reference Manual on the website (page 9),
chapter 12.
The sound is distorted or noisy. The volume may be turned up too high. Make sure all relevant volume settings are
appropriate.
This may be caused by certain effects or filter resonance settings. Check the
effect or filter settings and change them accordingly, referring to the Reference
Manual on the website (page 9), chapters 2 and 9.
Not all simultaneously played notes
sound.
You are probably exceeding the maximum polyphony (page 122) of the
instrument. When the maximum polyphony is exceeded, the earliest played notes
will stop sounding, letting the latest played notes sound.
The keyboard volume is lower than
the Song/Style playback volume.
The volume of the keyboard parts may be set too low. Raise the volume in the
BALANCE display (page 68).
The Main display does not appear
even when turning the power on.
This may occur if a USB flash drive has been connected to the instrument.
Connecting a USB flash drive may result a long interval between turning the power
on and appearance of the Main display. To avoid this, turn the power on after
disconnecting the USB flash drive.
Some characters of the file/folder
name are garbled.
The language settings have been changed. Set the appropriate language for the
file/folder name (page 21).
Loading ...
Loading ...
Loading ...