Loading ...
Loading ...
Loading ...
Home > Network > Additional Methods of Configuring Y
our Brother Machine for a Wireless
Network > Configure Your Machine for a Wireless Network Using the One-Push Method of Wi-Fi Protected
Setup
™
(WPS)
Configure Your Machine for a Wireless Network Using the One-Push
Method of W
i-Fi Protected Setup
™
(WPS)
Related Models: ADS-2700W
If your wireless access point/router supports Wi-Fi Protected Setup
™
(WPS), you can use WPS from your
machine's control panel menu to configure your wireless network settings.
Routers or access points that support WPS are marked with this symbol:
1. Press [Settings]
> [Network] > [WLAN] > [WPS].
2. When [Enable WLAN? The Wired Network I/F will be disabled. Do you want to
continue?] appears, press [Yes].
The wireless setup wizard starts. To cancel, press [No].
3. When the touchscreen instructs you to start WPS, press the WPS button on your wireless access point/
router. Press [OK], and then your machine automatically tries to connect to your wireless network.
If your wireless device is connected successfully, the LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, go to your model's Downloads page on the Brother Solutions Center at
support.brother.com.
T
o configure additional Network Settings, use the Web Based Management. See Related Information: Access
Web Based Management
Related Information
• Additional Methods of Configuring Y
our Brother Machine for a Wireless Network
• Access Web Based Management
92
Loading ...
Loading ...
Loading ...