Loading ...
Loading ...
Loading ...
Difficulties Cause Suggestions
The machine is not
turned on.
The machine was plugged in within
60 seconds after pulling out the plug.
Turn off the machine, wait 60 seconds, and then
turn it on again
Your computer cannot
find the machine via
USB interface.
A USB flash drive is inserted. Remove the USB flash drive.
The scanner driver is not installed. Install the scanner driver.
Cannot enter the IP
address and Subnet
Mask.
(ADS-2700W
)
"000.000.000.000." has already been
entered.
Press the
button to delete the entered
information, and then enter the correct information.
The computer has
detected a USB flash
drive.
A USB flash drive is inserted into the
machine and the computer is
connected to the machine using a
USB cable.
The computer detects the USB flash drive that is
inserted into the machine. Remove the USB flash
drive so that the computer does not detect it.
Although scanning is
allowed by the Secure
Function Lock, the Scan
Button on the right side
of the machine is not
available.
(ADS-2700W
)
The Scan Button on the machine is
not available when the Secure
Function Lock is turned on.
Turn off the Secure Function Lock.
I want to restrict to
change setting from
Remote Setup.
- When you set SFL or Setting Lock is on, Remote
Setup can't start by any user
.
I want to prevent users
from changing settings
using Remote Setup.
(ADS-2700W
)
- When you turn on the Secure Function Lock or
Setting Lock, the users cannot use Remote Setup.
Related Information
• If Y
ou Are Having Difficulty with Your Machine
• Clean the Scanner and Rollers
• Secure Function Lock 3.0
• Acceptable Documents
145
Loading ...
Loading ...
Loading ...