Loading ...
Loading ...
Loading ...
The daytime running lamps improve the visibility
of your vehicle during the day. Here, the Day‐Day‐
time Running Lightstime Running Lights function must be
switched on via the on-board computer
(Y page 169).
If the engine is running and you turn the light
switch to the T or L position, the manual
settings take precedence over the daytime run-
ning lamps.
Low-beam headlamps
G
WARNING
When the light switch is set to Ã, the low-
beam headlamps may not be switched on
automatically if there is fog, snow or other
causes of poor visibility due to the weather
conditions such as spray. There is a risk of an
accident.
In such situations, turn the light switch to
L.
When the ignition is switched on and the light
switch is in the L position, the parking lamps
and low-beam headlamps are switched on even
if the light sensor does not sense dark condi-
tions. This is a particularly useful function in the
event of rain and fog.
X
To switch on the low-beam headlamps:
select key position 2 with the Start/Stop
button or start the engine.
X
Turn the light switch to the L position.
The green L indicator lamp in the instru-
ment cluster lights up.
Rear fog lamp
The rear fog lamp improves visibility of your
vehicle for the traffic behind in the event of thick
fog. You must observe the legal requirements
for the country in which you are currently driving
when operating the rear fog lamp.
X
To switch on the rear fog lamp: select key
position 2 with the Start/Stop button or
start the engine.
X
Turn the light switch to the L or Ã
position.
X
Press the R button.
The yellow R indicator lamp in the instru-
ment cluster lights up.
X
To switch off the rear fog lamp: press the
R button.
The yellow R indicator lamp in the instru-
ment cluster goes out.
Parking lamps
!
If the battery charge is very low, the parking
lamps or standing lamps are automatically
switched off to enable the next engine start.
Always park your vehicle safely and in a well lit
area, in accordance with the relevant legal
stipulations. Avoid using the T parking
lamps over a period of several hours. If pos-
sible, switch on the right-hand X or left-
hand W standing lamps.
X
To switch on the parking lamps: turn the
light switch to the T position.
The green T indicator lamp in the instru-
ment cluster lights up.
Standing lamps
Switching on the standing lamps ensures the
corresponding side of the vehicle is illuminated.
X
To switch on the standing lamps: switch off
the engine with the Start/Stop button.
X
Turn the light switch to the W position (left-
hand side of the vehicle) or X position
(right-hand side of the vehicle).
Combination switch
:
High-beam headlamps
;
Turn signal, right
=
High-beam flasher
?
Turn signal, left
Exterior lighting
97
Lights and windshield wipers
Z
Loading ...
Loading ...
Loading ...