Loading ...
Loading ...
Loading ...
X
Pull oil dipstick : out of the dipstick guide
tube.
X
Wipe off oil dipstick :.
X
Slowly slide oil dipstick : into the guide tube
to the stop, and take it out again.
If the level is between MIN mark = and MAX
mark ;, the oil level is correct.
X
If the oil level has dropped to MIN mark = or
below, add 1.1 US qt (1.0 liter) engine oil.
Checking the oil level using the on-board computer
Calling up the oil level measurement
X
Select key position 2 with the Start/Stop button.
X
Use ò on the steering wheel to call up the list of menus.
X
Press the : or 9 button on the steering wheel to select the ServiceService menu.
X
Confirm by pressing a on the steering wheel.
X
Use : or 9 to select the Engine Oil LevelEngine Oil Level submenu.
X
Press a to confirm the selection.
The Measuring Engine Oil Level Accurate Only When Vehicle Is LevelMeasuring Engine Oil Level Accurate Only When Vehicle Is Level message
appears in the multifunction display.
The measurement takes a few seconds. You will see a message in the multifunction display. The
messages are explained in the following chapter.
Engine oil level display messages
Display messages
Possible causes/consequences and MM Solutions
Engine Oil Level OKEngine Oil Level OK
The engine oil level is correct.
Check Engine OilCheck Engine Oil
Level (Add 1 Liter)Level (Add 1 Liter)
The engine oil level is too low.
X
Add 1.1 US qt (1.0 liter) of engine oil.
Reduce Engine OilReduce Engine Oil
LevelLevel
The engine oil level is too high.
X
Have excess engine oil siphoned off.
For Engine OilFor Engine Oil
LevelLevel IgnitionIgnition MustMust
Be OnBe On
The ignition is switched off.
X
Select key position 2 with the Start/Stop button.
Need More Time toNeed More Time to
Check Engine OilCheck Engine Oil
LevelLevel
The required waiting period was not observed.
X
The engine must be at regular operating temperature.
Measurements can only be taken within the first four minutes after
the engine has been switched off.
Engine Oil LevelEngine Oil Level
NotNot MeasurableMeasurable withwith
Engine RunningEngine Running
The engine is running; oil level measurement is not possible.
X
Switch off the engine.
X
Repeat the measurement. Observe the required waiting period.
Engine compartment
237
Maintenance and care
Z
Loading ...
Loading ...
Loading ...