Loading ...
Loading ...
Loading ...
display goes out and the symbol of the selec-
ted drive program appears.
The drive program indicator on DYNAMIC
SELECT controller : lights up in red.
In addition, the current drive program settings
are displayed in the multimedia system dis-
play.
Additional settings
:
Manual mode (Y page 123)
;
ECO start/stop function (Y page 113)
=
Position of the exhaust flap (Y page 114)
?
Suspension (Y page 147)
A
ESP
®
(Y page 62)
When you press buttons : - A the corre-
sponding setting is selected. The DYNAMIC
SELECT controller setting is overwritten.
These settings will also be maintained for man-
ual mode and ESP
®
if you switch to drive pro-
gram RACE (AMG GT C Roadster), S+, S or C
using the DYNAMIC SELECT controller.
If you switch to drive program I, all stored char-
acteristics will be accepted. This is also the case
if you have previously pressed one of buttons :
- A. If you then change the drive program using
the DYNAMIC SELECT controller, the standard
setting for the drive program is selected.
AMG SPEEDSHIFT DCT 7-speed sports
transmission
Important safety notes
G
WARNING
If the engine speed is above the idling speed
and you engage transmission position 7
or C, the vehicle could pull away sud-
denly. There is a risk of an accident.
When engaging transmission position 7 or
C, always firmly depress the brake pedal
and do not simultaneously accelerate.
G
WARNING
The automatic transmission switches to neu-
tral position N when you switch off the engine.
The vehicle may roll away. There is a risk of an
accident.
After switching off the engine, always switch
to parking position P. Prevent the parked vehi-
cle from rolling away by applying the parking
brake.
E-SELECT selector lever
General notes
!
If the engine speed is too high or the vehicle
is in motion, do not shift the automatic trans-
mission directly from h to k, from k to h
or directly to j.
Do not open the driver's door while the vehi-
cle is in motion. At low speeds in transmission
position h or k, otherwise park position j
is engaged automatically.
The transmission could be damaged.
!
If you want to engage a transmission posi-
tion or to exit park position j, the engine
must be running.
The E-SELECT lever always returns to its original
position.
The current transmission position j, k, i or
h is shown in the transmission position display
in the multifunction display.
AMG SPEEDSHIFT DCT 7-speed sports transmission
117
Driving and parking
Z
Loading ...
Loading ...
Loading ...