Loading ...
Loading ...
Loading ...
X
Turn the SmartKey to key position u in the
ignition lock and remove it.
X
Secure the vehicle.
Tow-starting (emergency engine
starting)
!
Vehicles with automatic transmission must
not be tow-started. You could otherwise dam-
age the automatic transmission.
i
You can find information on "Jump-starting"
under (Y page 256).
Fuses
Important safety notes
G
WARNING
If you manipulate or bridge a faulty fuse or if
you replace it with a fuse with a higher amper-
age, the electric cables could be overloaded.
This could result in a fire. There is a risk of an
accident and injury.
Always replace faulty fuses with the specified
new fuses having the correct amperage.
Blown fuses must be replaced with fuses of the
same rating, which you can recognize by the
color and value. The fuse ratings are listed in the
fuse allocation chart.
The fuse allocation chart is on the fuse box in the
trunk (Y page 262).
If a newly inserted fuse also blows, have the
cause traced and rectified at a qualified special-
ist workshop, e.g. an authorized Mercedes-Benz
Center.
!
Only use fuses that have been approved for
Mercedes-Benz vehicles and which have the
correct fuse rating for the system concerned.
Otherwise, components or systems could be
damaged.
!
Make sure that no moisture can enter the
fuse box when the cover is open.
!
When closing the cover, make sure that it is
lying correctly on the fuse box. Moisture seep-
ing in or dirt could otherwise impair the oper-
ation of the fuses.
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the compo-
nents on the circuit and their functions stop
operating.
Before changing a fuse
X
Switch off the engine.
X
Switch off all electrical consumers.
X
Open the driver's door.
The on-board electronics are now in key posi-
tion u. This is the same as the key having
been removed.
or, if the SmartKey is inserted in the ignition
lock:
X
Remove the SmartKey from the ignition lock.
X
Secure the vehicle against rolling away
(Y page 127).
All indicator lamps in the instrument cluster
must be off.
Fuse box in the front passenger foot-
well
!
The floor panel must be installed properly,
otherwise moisture or dirt could impair the
function of the fuses.
X
Open the front-passenger door.
X
To open: remove the carpet over the footrest.
X
Loosen screws : on the floor panel using a
suitable tool.
X
Remove the floor panel.
X
To close: install the floor panel again.
X
Screw in and tighten screws :.
X
Put in the carpet and press to secure.
Fuses
261
Breakdown assistance
Z
Loading ...
Loading ...
Loading ...