Loading ...
Loading ...
Loading ...
Display messages
Possible causes/consequences and MM Solutions
Engine Oil LevelEngine Oil Level
CorrectCorrect MeasurementMeasurement
Only if Vehicle IsOnly if Vehicle Is
on Level Groundon Level Ground
The vehicle is not parked on a level surface.
X
Park the vehicle on a level surface.
Engine Oil LevelEngine Oil Level
Not MeasurableNot Measurable
Oil level measurement with the oil dipstick is possible. The measuring
system is malfunctioning.
X
Visit a qualified specialist workshop.
Adding engine oil
G
WARNING
Certain components in the engine compart-
ment, such as the engine, radiator and parts
of the exhaust system, can become very hot.
Working in the engine compartment poses a
risk of injury.
Where possible, let the engine cool down and
touch only the components described in the
following.
G
WARNING
If engine oil comes into contact with hot com-
ponents in the engine compartment, it may
ignite. There is a risk of fire and injury.
Make sure that engine oil is not spilled next to
the filler neck. Let the engine cool down and
thoroughly clean the engine oil off the com-
ponents before starting the engine.
H
Environmental note
When adding oil, take care not to spill any. If
oil enters the soil or waterways, it is harmful to
the environment.
!
Use only engine oils and oil filters that are
approved for vehicles with a service system. A
list of the engine oils and oil filters that have
been tested and approved in accordance with
Mercedes-Benz Specifications for Service
Products is available at any authorized
Mercedes-Benz Center.
The following cause engine failure or damage
to the exhaust system:
R
Use of engine oils and oil filters that have
not been expressly approved for the service
system
R
Replacement of engine oil and oil filter after
the replacement interval specified by the
service system has expired
R
Use of engine oil additives
!
Do not add too much oil. If the oil level is
above the "max" mark on the dipstick, too
much oil has been added. This can lead to
damage to the engine or the catalytic con-
verter. Have excess oil siphoned off.
Example: engine oil cap
X
Turn cap : counter-clockwise and remove it.
X
Add engine oil.
If the oil level is at or below the MIN mark on
the oil dipstick, add 1.1 US qt (1.0 liter) of
engine oil.
X
Replace cap : on the filler neck and turn
clockwise.
Ensure that the cap locks into place securely.
X
Check the oil level again with the oil dipstick
(Y page 236).
Further information on engine oil (Y page 291).
238
Engine compartment
Maintenance and care
Loading ...
Loading ...
Loading ...