Loading ...
Loading ...
Loading ...
Display messages
Possible causes/consequences and MM Solutions
If the conditions are not fulfilled, the system is not operating correctly.
X
Visit a qualified specialist workshop immediately.
For further information about the Occupant Classification System, see
(Y page 48).
Lights
Display messages
Possible causes/consequences and MM Solutions
b
CheckCheck LeftLeft LowLow BeamBeam
(example)
The corresponding bulb is faulty.
X
Visit a qualified specialist workshop.
i
LED light sources: the display message for the corresponding
lamp only appears when all the LEDs in the lamp have failed.
b
Malfunction SeeMalfunction See
Operator’s ManualOperator’s Manual
The exterior lighting is faulty.
X
Visit a qualified specialist workshop.
b
Automatic HeadlampAutomatic Headlamp
Mode InoperativeMode Inoperative
The light sensor is defective.
X
Visit a qualified specialist workshop.
b
Switch Off LightsSwitch Off Lights
The lights are still switched on when you leave the vehicle. A warning
tone also sounds.
X
Turn the light switch to the à or L position.
Adaptive HighbeamAdaptive Highbeam
Assist InoperativeAssist Inoperative
Adaptive Highbeam Assist is faulty.
X
Visit a qualified specialist workshop.
Adaptive HighbeamAdaptive Highbeam
Assist CurrentlyAssist Currently
Unavailable SeeUnavailable See
Operator's ManualOperator's Manual
Adaptive Highbeam Assist is deactivated and temporarily inoperative.
Possible causes are:
R
the windshield in the camera's field of vision is dirty
R
visibility is impaired due to heavy rain, snow or fog
X
Clean the windshield.
If the system detects that the camera is fully operational, the Adap‐Adap‐
tivetive HighbeamHighbeam AssistAssist NowNow AvailableAvailable display message is shown.
Adaptive Highbeam Assist is operational again.
186
Display messages
On-board computer and displays
Loading ...
Loading ...
Loading ...