Loading ...
Loading ...
Loading ...
Setting the volume:
X
Press button :.
If you select the loudest setting, indicator
lamp ; lights up.
You can also adjust the position of the exhaust
flap using the:
R
DYNAMIC SELECT controller (Y page 116)
R
Multimedia system
Problems with the engine
Problem
Possible causes/consequences and MM Solutions
The engine does not
start.
The HOLD function or Active Distance Assist DISTRONIC is activated.
X
Deactivate the HOLD function (Y page 145) or Active Distance
Assist DISTRONIC (Y page 142).
X
Try to start the engine again (Y page 111).
The engine does not
start. The starter motor
can be heard.
R
There is a malfunction in the engine electronics.
R
There is a malfunction in the fuel supply.
Before attempting to start the engine again:
X
Press the Start/Stop button repeatedly until all indicator lamps in
the instrument cluster go out.
or
X
Turn the SmartKey back to SmartKey position u in the ignition
lock.
X
Try to start the engine again (Y page 111). Avoid excessively long
and frequent attempts to start the engine as these will drain the
battery.
If the engine does not start after several attempts:
X
Consult a qualified specialist workshop.
The engine does not
start. You cannot hear
the starter motor.
The on-board voltage is too low because the battery is too weak or
discharged.
X
Jump-start the vehicle (Y page 256).
If the engine does not start despite attempts to jump-start it:
X
Consult a qualified specialist workshop.
The starter motor was exposed to a thermal load that was too high.
X
Try to start the engine again (Y page 111).
If the engine still does not start:
X
Consult a qualified specialist workshop.
Driving
115
Driving and parking
Z
Loading ...
Loading ...
Loading ...