Loading ...
Loading ...
Loading ...
Exterior mirror pushed out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
X
Press and hold button ? until you hear a click
and the mirror engages audibly into position
(Y page 92).
The mirror housing is engaged again and you
can adjust the exterior mirrors as usual
(Y page 92).
Automatic anti-glare mirrors
G
WARNING
Electrolyte may escape if the glass in an auto-
matic anti-glare mirror breaks. The electrolyte
is harmful and causes irritation. It must not
come into contact with your skin, eyes, res-
piratory organs or clothing or be swallowed.
There is a risk of injury.
If you come into contact with the electrolyte,
observe the following:
R
Rinse off the electrolyte from your skin
immediately with water.
R
Immediately rinse the electrolyte out of
your eyes thoroughly with clean water.
R
If the electrolyte is swallowed, immediately
rinse your mouth out thoroughly. Do not
induce vomiting.
R
If electrolyte comes into contact with your
skin or hair or is swallowed, seek medical
attention immediately.
R
Immediately change out of clothing which
has come into contact with electrolyte.
R
If an allergic reaction occurs, seek medical
attention immediately.
The rear-view mirror and the exterior mirror on
the driver's side automatically go into anti-glare
mode if the following conditions are met simul-
taneously:
R
the ignition is switched on
R
incident light from headlamps strikes the sen-
sor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior lighting
is switched on.
Parking position for the exterior mir-
ror on the front passenger side
Storing the parking position
You can position the front-passenger side exte-
rior mirror in such a way that you can see the
rear wheel on that side as soon as you engage
reverse gear. You can store this position.
Using reverse gear
:
Memory button M
;
Button for the driver's side exterior mirror
=
Button for the front-passenger side exterior
mirror
?
Switch
X
Select key position 2 with the Start/Stop
button.
X
Press button =.
X
Start the engine.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the default setting parking posi-
tion.
X
Use button ? to adjust the exterior mirror to
a position that allows you to see the rear
wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position
after approximately ten seconds.
Using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M :. The reverse gear must not
be engaged.
Mirrors
93
Seats, steering wheel and mirrors
Z
Loading ...
Loading ...
Loading ...