Loading ...
Loading ...
Loading ...
En
20
Using saved loops
With this function, a loop is saved in a loop slot in Serato DJ or a saved
loop is called.
1 Press the [ROLL] mode button while pressing the
[SHIFT] button.
The mode switches to saved loop mode.
2 During loop playback, press a performance pad.
The loop is assigned to a loop slot on Serato DJ.
Slot 1 Slot 2 Slot 3 Slot 4
Slot 7 Slot 8Slot 5 Slot 6
3 Press the performance pad while pressing the [SHIFT]
button.
Playback continues from the beginning of the loop.
4 Press the same performance pad again.
Loop playback is canceled.
5 During loop playback, press the [PARAMETERc]
button.
The loop length is cut in half.
6 During loop playback, press the [PARAMETERd]
button.
The loop length is doubled.
7 During loop playback, press the [PARAMETERc]
or [PARAMETERd] button while pressing the [SHIFT]
button.
The loop moves, maintaining the same length (loop shift).
Using pad trans
This function cuts the sound according to the beat timing of the BPM of
the track that is loaded in the deck.
1 Press and hold the [ROLL] button.
The mode switches to the pad trans mode.
The pad trans beats are assigned to the respective pads as shown below.
1/16 beat 1/8 beat
1/3 beat
1/4 beat 1 beat
Manual1 beat 2 beat
The sound is cut while a manual pad is pressed.
2 Press and hold a pad during playback.
The sound is cut according to the beat timing while the pad is pressed
and held.
! Pad trans mode will not operate when the channel fader is lowered
to the bottommost position. Use the mode with the channel fader
raised.
3 Release your finger from the pad.
Normal playback resumes.
Pitch play mode
To use this function, you need to activate the Pitch ’n Time DJ function.
For details, see “Pitch ’n Time DJ Activation Manual” from “Software
Info” on the Pioneer DJ support site below.
pioneerdj.com/support/
1 Press the [SAMPLER] mode button while pressing the
[SHIFT] button.
2 Press a performance pad while pressing the [SHIFT]
button to select a registered hot cue point.
3 Press a performance pad.
Pressing the [PARAMETERc] button or [PARAMETERd] button selects
the pitch range from the up range, middle range, and down range.
Playback starts from the hot cue point selected in step 2 at the pitch
assigned to the pressed pad.
Up range
0+1+
2+
3
+4 +５ +６ +７
Middle range
0+1+
2+
3
−4 −3 −2 −1
Down range
−3 −2 −1 0
−７ −６ −５ −４
Using slip mode
When slip mode is turned on, normal playback with the original rhythm
continues in the background during scratching, looping and hot cue
playback. When scratching, looping or hot cue playback is canceled,
normal playback resumes from the position reached up to the point at
which the operation was canceled.
Various performances can be achieved without breaking the rhythm.
! The [SLIP] button flashes as set in utilities mode.
Slip scratching
1 Press the [SLIP] button while pressing the [SHIFT]
button.
The unit switches to vinyl mode.
2 During playback, operate the top of the jog dial to
scratch.
Normal playback continues in the background even while scratching.
Loading ...
Loading ...
Loading ...