Loading ...
Loading ...
Loading ...
67
Underbench oven
Your underbench oven looks best when the control panel
is directly under the benchtop. An upper infill panel may
be added if the cooktop placed above the benchtop is too
deep. Refer to cooktop installation instructions for required
clearance between cooktop and oven.
IMPORTANT!
Note: Dimension’D’*
A requirement for all EVEPxxxx pyrolytic clean
ovens and all Duo ovens – for proper ventilation
there MUST be a gap at the bottom rear of the
cabinet. This can be a full width opening 20mm
deep. Refer to dimension “D” in relevant diagram.
Power point connection for the EVE607 and EVEP618
must be accessible with the appliance fully installed.
If the supply cord is damaged it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Cut-out dimensions
type of fit A (width) B (height) C (depth)
Flush fit (mm) 600 600 581 min.
Proud fit (mm) 568 590 560 min.
561mm
mounting
holes
582mm
596mm
Double oven Cut-out dimensions
type of fit A (width) B (height) C (depth)
Flush fit (mm) 600 1086 581 min.
Proud fit (mm) 568 1078 560 min.
561mm
650mm
min.
mounting
holes
582mm
mounting
holes 582mm
596mm
Pyrolytic underbench Cut-out dimensions
type of fit A (width) B (height) C (depth) D*
Flush fit (mm) 600 600 581 min. 20
mounting
holes
582mm
561mm
596mm
Duo oven Cut-out dimensions
type of fit A (width) B (height) C (depth) D*
Flush fit (mm) 600 893 581 min. 20
D
561mm
mounting holes
582mm
fit long screws
provided
mounting holes
fit countersunk screws
with plastic spacers
provided
650mm
min.
Loading ...
Loading ...
Loading ...