Loading ...
Loading ...
Loading ...
20 electrolux.com.au
Light operation
During operation of the oven the light can be switched off
by pressing and holding the button until the light turns
off. Also the light can be turned on from the standby state
by pressing and holding the button until the light
comes on.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1. Switch off the appliance using the function selector
switch.
2. Press and hold the TIME and + buttons at the same
time until the word ‘SAFE’ is displayed and a double
beep is sounded. The word SAFE will be replaced by
a padlock symbol on the display after 5 seconds.
Releasing the child-proof lock
Press and hold the TIME and + buttons at the same time
until a double beep is sounded. This will commence to
unlock the door and after 5 seconds the oven is ready for
use.
Switching the clock display ON and OFF
1. Press together + and – for 2 seconds to switch ‘off’
the display.
2. Press together + and – for 2 seconds to switch the
clock display ‘on’ again.
3. When the display is set to the ‘off’ state pressing the
+ and – button momentarily will display the time for 5
seconds then turn off the display.
4. When the display is set to the ‘off’ state, turning on
the oven will turn the display ‘on’ for the duration of
oven operation. Once the function is turned ‘off’ the
display will turn off after 5 seconds.
NOTE: if a timer mode is set or the oven is operating, then
it is not possible to switch the display off.
Safety Cut-out feature
The oven automatically switches itself off if the temperature
is not adjusted or the appliance is left operating after a
period of time. The oven switches itself off after:
• 12.5 hours when the temperature is set less
than 120°C.
• 8.5 hours when the temperature is set to 120°C
or above, and below 200°C.
• 5.5 hours when the temperature is set to 200°C
or above, and below 250°C.
• 3.0 hours when the temperature is set at 250°C.
6. 5 seconds after the last change the ‘cook time’ and
‘end time’ arrows are lit to confirm that the oven has
been programmed.
7. When the delayed start cooking time has elapsed,
a signal will sound and the appliance will turn off. To
stop the signal, press any button on the clock and
then turn the oven function selector to OFF.
NOTE: Delayed start cooking time cannot be set for the
Rapid Heat function. The feature can be cancelled at any
time by returning the function selector to OFF.
USING THE APPLIANCE
Additional Functionality
Setting the countdown timer
Use this for timing any activity. For example boiling eggs.
1. Press the button, the display will flash.
2. Set the countdown time you want by using + and
–. Commence with setting the number of seconds
first. The minutes and hours can then be set by
subsequently pressing the button again and
adjusting using the + or – buttons. 5 seconds after
the last change the timer will stop flashing, confirming
the timer has been set.
3. To cancel the timer press the button, the display
will flash. Then press and hold + and – buttons until
the timer is cleared.
4. To stop the beeper, press any button.
NOTE: The clock display cannot be selected when the
timer is operating.
Elapsed Time
When an oven function is selected (other than pyrolytic
clean) an elapsed timer commences on the display.
To reset this timer press and hold both the + and –
buttons until the timer is reset.
Displaying the oven temperature
During operation of the oven the current oven temperature
during pre-heating of the oven can be displayed by
pressing the TEMP button. During normal operation the
set temperature can be reviewed by pressing the TEMP
button.
NOTE: this temperature will only be displayed for
approximately 5 seconds.
EVEP604, EVEP614 (CONTINUED)
Loading ...
Loading ...
Loading ...