Loading ...
Loading ...
Loading ...
30 electrolux.com.au
IMPORTANT
30 seconds after a cooking function has started, it
is no longer possible to delay the end time.
In order to delay a cooking function that has
already started, the oven needs to be switched off
then switched on again and re-programmed.
Even though the heating element turns off the oven will still
retain substantial heat. This will continue to cook the food
until it is removed or the oven cools down. If you do not
plan on being present when the oven turns off, you should
take this extra heating time into account.
Timers
The appliance has two timers which can be used one at a
time. The count up timer can be used to measure a period
of time. The count down timer beeps at the end of a
preset time.
Setting the count up timer
The timer can be used independently of the oven for
measuring a count up period. There is no alert provided
with this timer.
1. Touch either ‘timer’ + or –.
2. 00min will be displayed along with a bell and the up
arrow will flash.
3. To begin the count up timer press OK.
4. To reset the count up timer, press ‘timer’ – once to
show 00min. Press OK to restart.
5. To cancel the count up timer press ‘timer’ – twice.
Setting the count down timer
The timer can be used independently of the oven for
setting a count down period. When the period of time has
elapsed, an audible signal sounds.
1. Touch either ‘timer’ + or –.
2. 00min will be displayed along with a bell and the up
arrow will flash.
3. Touch the ‘timer’ + to set the countdown period.
4. The timer bell icon will flash.
• When the cook time has elapsed, an audible
signal will sound for 2 minutes, the oven will
switch off and COOKING FINISHED will be
displayed.
• To stop the audible signal, press any of the
symbols on the control panel.
• If you wish to cook a bit longer, press the
‘cook time’ symbol for each additional
minute you require. The oven automatically
reverts to the function and temperature
previously programmed. This feature is
available for 10 minutes after cooking has
finished. After that, the oven automatically
switches off.
Setting the delay end time
The delay end function can be used to switch the oven on
and off at a specific time during the day.
1. Check the clock displays the correct time of day.
2. Select the desired oven function and cooking
temperature.
3. Set the required cook time.
4.
Touch the ‘delay end’ symbol to move the end time.
5. Touch ‘OK’ or after 8 seconds from the last time
adjustment the SET icon will light and the oven is now
programmed. The oven will start its cooking cycle to
finish at the set ‘end time’.
6. When the oven has finished cooking, cook time can
be extended or the beeper turned off just as in ‘cook
time’ mode.
7. Touch the ‘delay end’ symbol to move the end time
forward.
8. Touch ‘OK’ or after 8 seconds from the last time
adjustment the SET icon will light and the oven is now
programmed.
The oven will commence its cooking cycle to finish at the
set ‘end time’.
EVE616, EVE626, EVE636 (CONTINUED)
Loading ...
Loading ...
Loading ...