Loading ...
Loading ...
Loading ...
50 electrolux.com.au
Turning the oven on
Switch on the oven by touching the ON/OFF symbol.
The control panel will come on and inform you that you
need to select a cooking function.
Selecting the upper or lower oven
(EVEP626)
This model is equipped with two ovens. Use the
oven selector symbol to toggle between the upper and
lower ovens.
The oven cavity icon on the control panel will show which
oven is currently active.
Only one cavity can be cleaned at a time.
Select
Select the pyrolytic clean function.
Use cooking function selector to slect the
‘pyro clean’ function.
Selecting the required cleaning cycle
Use the ‘cook time’ control to select Light, Medium or
Heavy depending on the soiling of the oven.
Start Pyrolytic
Unlike other cooking functions, you MUST touch ‘OK’ for
the pyrolytic cycle to start. The display will prompt you to
remove all shelves and trays. You must touch ‘OK’ again
to start. The oven light will then go out and the Pyrolytic
function will start.
IMPORTANT
At the beginning of pyrolytic cleaning the door will
automatically lock will appear on the display.
During the pyrolytic cleaning cycle there may be
some burn off odours. It is advised to keep the
room well ventilated during this cycle.
(EVEP626)
For this model with two ovens, both doors will lock
automatically at the beginning of the pyrolytic cleaning.
Cooking is not permitted in either oven during the pyrolytic
clean function.
The door(s) will only unlock when the oven has cooled to
a safe temperature. Turning the function off will not unlock
the door(s). This will only happen when safe temperatures
are reached.
When the pyrolytic cleaning function is on, it is advisable
not to use a cooktop if it is fitted above the oven. This
could cause overheating and damage to both appliances.
NOTE: The cooling fan will operate at an increased speed
for Pyrolytic cleaning and will continue to run until the oven
has cooled down. This is normal.
It is recommended to clean the oven regularly to keep it in
its best condition.
After Pyrolytic cleaning
After cool-down wipe the ash out of the oven with a soft
damp cloth and warm water.
To restore the enamel shine to more difficult areas, use a
damp cloth with vinegar and detergent.
CAUTION
Do not turn off the mains power supply to the
oven during the pyrolytic cycle. This could damage
the appliance.
EVE607, EVEP606,
EVEP616, EVEP618, EVEP626 (CONTINUED)
Loading ...
Loading ...
Loading ...