Loading ...
Loading ...
Loading ...
11 Audio and media
11
396
* Option/accessory, for more information, see Introduction.
Connecting an external audio source
via AUX/USB* input
An external audio source, e.g. an iPod
®
or
MP3 player, can be connected to the audio
system via any of the connections in the cen-
tre console.
Connection points for external audio sources.
To connect the audio source:
1. Press MEDIA, turn TUNE to the required
sound source
USB, iPod or AUX, press
OK/MENU.
>
If USB is selected then
Connect USB
is shown in the display screen.
2. Connect your audio source to one of the
connections in the centre console's stor-
age compartment (see previous illustra-
tion).
The text Reading USB is shown in the dis-
play screen when the system is loading the
storage media's file structure. Depending on
the file structure and number of files there
may be some delay before loading is finished.
NOTE
The system supports most iPod
®
models
produced in 2005 or later.
NOTE
To prevent damage to the USB connec-
tion, this is shut off if the USB connection
is short-circuited or if a connected USB
unit is taking too much power (this may
happen if the unit connected does not
meet the USB standard). The USB con-
nection is reactivated automatically the
next time the ignition is turned on, unless
the fault persists.
Related information
•
External audio source via AUX/USB* input
(p. 395)
•
Playback and navigation of external audio
source (p. 396)
Playback and navigation of external
audio source
Playback and navigation of external audio
source
26
For basic playback and navigation, see Audio
and media - operating the system (p. 372).
See below for a more detailed description.
Audio files have the symbol
, video
files
27
have the symbol
and folders
have the symbol
.
When playback of a file is complete the play-
back of the other files (of the same type) in
26
Only applies to USB and iPod
®
.
27
Applies to High Performance Multimedia and Premium Sound Multimedia.
Loading ...
Loading ...
Loading ...