Loading ...
Loading ...
Loading ...
07 Driver support
07
}}
207
NOTE
Queue Assist can keep the car stationary
for a maximum of 4 minutes - then the
brakes release.
See more information under the header
below, "Cessation of automatic braking
when stationary".
Change of target
If the target vehicle in front suddenly turns then
there may be stationary traffic in front.
When the adaptive cruise control is following
another vehicle at speeds lower than
30 km/h and changes target from a moving to
a stationary vehicle, the cruise control will
slow down for the stationary vehicle.
WARNING
When the adaptive cruise control is follow-
ing a vehicle ahead at speeds in excess of
30 km/h and the target is changed from a
vehicle ahead to a stationary vehicle, the
cruise control will ignore the stationary
vehicle and instead select the stored
speed.
•
The driver must intervene him/herself
and brake.
Automatic standby mode with change
of target
The adaptive cruise control is disengaged
and set in standby mode:
•
when the speed is below 5 km/h and
cruise control is not sure whether the tar-
get object is a stationary vehicle or some
other object, e.g. a speed bump.
•
when the speed is below 5 km/h and the
vehicle in front turns off so the cruise
control no longer has a vehicle to follow.
Termination of automatic braking at a
standstill
In the following situations, Queue Assist
stops automatic braking at a standstill:
•
the driver opens the door
•
the driver takes off his seatbelt.
This means that the brakes are released and
the car will start to roll - the driver must there-
fore intervene and brake the car himself in
order to maintain its position.
IMPORTANT
Queue Assist can keep the car stationary
for a maximum of 4 minutes - then the
brakes release.
The driver's attention is drawn to this over
several stages, with increasing intensity:
1. Acoustic alarm (pinging) and text mes-
sage.
2. A warning lamp in the windscreen also
starts to flash.
3. "Stabbing" braking occurs.
For more information on symbols, mes-
sages and their meaning, see the section
Symbols and messages in the display (p.
212).
Queue Assist releases the foot brake and is
set to standby mode in these situations as
well:
•
the driver puts his/her foot on the brake
pedal
•
the gear selector is moved to P, N or R
position
•
the driver sets the cruise control in
standby mode
•
the parking brake is applied.
Loading ...
Loading ...
Loading ...