Loading ...
Loading ...
Loading ...
||
07 Driver support
07
254
* Option/accessory, for more information, see Introduction.
Principle for PAP.
The PAP function parks the car using the fol-
lowing steps:
1. The function searches for a parking space
and measures it (A & B (p. 254)). During
measurement, speed must not
exceed 30 km/h.
2. The car is steered into the space while
reversing (C & D (p. 255)).
3. The car is straightened up in the space by
driving back and forth (E & F (p. 255)).
Related information
•
Park Assist Pilot (PAP)* (p. 253)
•
Park assist camera (p. 249)
Park Assist Pilot (PAP)* - operation
The Park Assist Pilot (PAP – Park Assist Pilot)
helps the driver to park by first checking
whether a space is sufficiently large and then
turning the steering wheel and steering the
car into the space.
The driver is instructed about how PAP works
by means of simple, clear instructions in the
combined instrument panel - using both
graphics and text graphics and text message
(p. 257).
NOTE
Remember that certain steering wheel
positions may obstruct the combined
instrument panel's instructions when you
turn it during the parking manoeuvre.
1 - Searching and checking
measurements
The PAP function searches for a parking
space and checks whether it is big enough.
Proceed as follows:
1. Activate PAP by pressing
this button and do not drive
faster than 30 km/h.
2. Keep an eye on the combined instrument
panel and be prepared to stop the car
when the graphics and text message so
request.
3. Stop the car when the graphics and text
so request.
NOTE
PAP searches the area for a parking
space, displays instructions and guides
the car in on its passenger side. But if
required the car can also be parked on the
driver's side of the street:
•
Activate the direction indicator for the
driver's side - the car is then parked
on that side of the street instead.
Loading ...
Loading ...
Loading ...