Loading ...
Loading ...
Loading ...
10 Maintenance and service
10
* Option/accessory, for more information, see Introduction.
343
Lamp replacement - location of front
lamps
The overview shows the location of the lamps
at the front.
Position/parking lamps (p. 345) (LED in
Xenon headlamps)
Main beam in Xenon headlamps (p.
344) / Extra main beam in Xenon head-
lamps (p. 345)
Dipped beam in halogen headlamps (p.
344) / Xenon lamps in Xenon headlamps
(p. 342)
Indicator (p. 345)
Daytime running lights (p. 346) (LED* or
bulb depending on variant)
Related information
•
Lamp replacement (p. 342)
•
Lamps - specifications (p. 348)
Lamp replacement - headlamps
All of the headlamp bulbs are replaced via the
engine compartment. First loosen and remove
the whole headlamp.
1.
Lift out the bonnet stop.
2.
Loosen the screw with a Torx tool,
size T30.
3.
Turn the locking pin anticlockwise.
Pull out the locking pin.
4.
Release the headlamp by alternately
tilting and pulling it out.
IMPORTANT
Take care when lifting out the headlamp so
as not to damage any parts.
5.
Press down the catch.
Unplug the connector.
Place the headlamp on a soft surface so
as not to scratch the lens.
IMPORTANT
Do not pull the electrical cable, only the
connector.
6. Replace the relevant bulb as instructed.
The headlamp must be fitted and the contact
fitted correctly before switching on the lights
or switching key position.
Related information
•
Lamp replacement (p. 342)
•
Lamp replacement - location of front
lamps (p. 343)
•
Lamp replacement - cover for main/
dipped beam bulbs (p. 344)
•
Lamps - specifications (p. 348)
Loading ...
Loading ...
Loading ...