Loading ...
Loading ...
Loading ...
R
you are driving on sand or gravel.
R
you adopt a very sporty driving style (corner-
ing at high speeds or driving with high rates of
acceleration).
R
you are towing a very heavy or large trailer.
R
you are driving with a heavy load (in the vehi-
cle or on the roof).
Restarting the tire pressure loss warn-
ing system
Restart the tire pressure loss warning system if
you have:
R
changed the tire pressure
R
changed the wheels or tires
R
mounted new wheels or tires
X
Before restarting, make sure that the tire
pressures are set properly on all four tires for
the respective operating conditions.
The recommended tire pressure can be found
on the Tire and Loading Information placard
on the B-pillar. Additionally, a tire pressure
table is attached to the fuel filler flap. The tire
pressure loss warning system can only give
reliable warnings if you have set the correct
tire pressure. If an incorrect tire pressure is
set, these incorrect values will be monitored.
X
Also observe the notes in the section on tire
pressures (Y page 333).
X
Make sure that the SmartKey is in position 2
in the ignition lock (Y page 131).
X
Press ò on the steering wheel to call up
the menu list.
X
Press 9 or : on the steering wheel to
select the Service
Service menu.
X
Confirm by pressing a on the steering
wheel.
X
Press 9 or : to select Tire Pres‐Tire Pres‐
suresure.
X
Press a to confirm.
The Run Flat Indicator ActiveRun Flat Indicator Active PressPress
'OK' to Restart'OK' to Restart message is shown in the
multifunction display.
If you wish to confirm the restart:
X
Press the a button.
The Tire Pressure Now OK?
Tire Pressure Now OK? message is
shown on the multifunction display.
X
Press 9 or : to select YesYes.
X
Press a to confirm.
The Run Flat Indicator RestartedRun Flat Indicator Restarted mes-
sage is shown on the multifunction display.
After a teach-in period, the tire pressure loss
warning system will monitor the set tire pres-
sures of all four tires.
If you wish to cancel the restart:
X
Press the % button.
or
X
If the Tire Pressure Now OK?Tire Pressure Now OK? message
appears, press 9 or : to select Can‐Can‐
celcel.
X
Press a to confirm.
The tire pressure values stored at the last
restart will continue to be monitored.
Tire pressure monitor
General notes
If a tire pressure monitor is installed, the vehi-
cle's wheels have sensors that monitor the tire
pressures in all four tires. The tire pressure mon-
itor warns you if the pressure drops in one or
more of the tires. The tire pressure monitor only
functions if the corresponding sensors are
installed in all wheels.
Information on tire pressures is displayed in the
multifunction display. After a few minutes of
driving, the current tire pressure of each tire is
shown in the ServiceService menu of the multifunction
display; see illustration (example).
Tire pressure
337
Wheels and tires
Z
Loading ...
Loading ...
Loading ...