Loading ...
Loading ...
Loading ...
Do not use the 360° camera in this case. You
can otherwise injure others or cause damage to
objects or the vehicle.
The guide lines in the multimedia system display
show the distances to your vehicle. The distan-
ces only apply to road level.
In trailer mode, the guide lines are shown at the
level of the trailer tow hitch.
The camera in the rear area is protected by
means of a flap. This flap opens when the 360°
camera is activated. Observe the notes on
cleaning (Y page 309). For technical reasons,
the flap may remain open briefly after the 360°
camera has been deactivated.
The field of vision and other functions of the
camera system may be restricted due to addi-
tional attachments (e.g. license plate holder,
rear bicycle carrier).
On vehicles with height-adjustable chassis,
depending on technical conditions, leaving the
standard height can result in:
R
inaccuracies in the guide lines
R
inaccuracies in the display of generated
images (top view)
Activation conditions
The image from the 360° camera appears if:
R
the multimedia system is switched on
R
the 360° Camera360° Camera function is switched on
If you are driving faster than at a moderate
speed and you turn on the 360° camera, a warn-
ing message appears.
The warning message disappears if:
R
you are again driving at a moderate speed The
360° camera is then activated
R
the message is confirmed with the % but-
ton
Switching the 360° camera on and off
using the button
X
To switch on: press button :.
Depending on whether transmission position
h or k is selected, the following appears:
R
a split screen with top view and the image
from the front camera or
R
a split screen with top view and the image
from the rear view camera
X
To switch off: press button :.
Activating the 360° camera using
reverse gear
The 360° camera images can be automatically
displayed by engaging reverse gear.
X
Make sure that the Activation by R gear
Activation by R gear
function is selected on the multimedia system
(see the Digital Operator's Manual).
X
To show the 360° camera image: engage
reverse gear.
The multimedia system shows the area
behind the vehicle in split-screen mode. You
see the top view of the vehicle and the image
from the rear view camera.
You cannot stop the 360° camera display if
reverse gear is engaged.
Selecting the split-screen view or full
screen mode
Switching between split screen views:
X
To switch to the line with the vehicle icons:
slide 5 the controller.
X
To select a vehicle icon: turn the controller.
Switching to full screen mode:
X
Turn and press 180°180° ViewView with the controller.
188
Driving systems
Driving and parking
Loading ...
Loading ...
Loading ...