Loading ...
Loading ...
Loading ...
Calling up a stored parking position set-
ting
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 131).
X
Adjust the exterior mirror on the front-
passenger side using button =.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the stored parking position.
The exterior mirror on the front-passenger side
moves back to its original position:
R
as soon as you exceed a speed of 9 mph
(15 km/h)
R
about ten seconds after you have disengaged
reverse gear
R
when you use button ? to select the exterior
mirror on the driver's side
Memory function
Important safety notes
G
WARNING
If you use the memory function on the driver's
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made. There is a risk of an accident.
Only use the memory function on the driver's
side when the vehicle is stationary.
G
WARNING
When the memory function adjusts the seat or
steering wheel, you and other vehicle occu-
pants – particularly children – could become
trapped. There is a risk of injury.
While the memory function is making adjust-
ments, make sure that no one has any body
parts in the sweep of the seat or steering
wheel. If somebody becomes trapped, imme-
diately release the memory function position
button. The adjustment process is stopped.
G
WARNING
Children could become trapped if they acti-
vate the memory function, particularly when
unattended. There is a risk of injury.
When leaving the vehicle, always take the
SmartKey with you and lock the vehicle. Never
leave children unsupervised in the vehicle.
The memory function can be used at any time,
e.g. even when the SmartKey is not in the igni-
tion lock.
Storing settings
With the memory function, you can store up to
three different settings, e.g. for three different
people.
The following settings are stored as a single
memory preset:
R
position of the seat, backrest and head
restraint
R
driver's side: position of the exterior mirrors
on the driver's and front-passenger sides
R
position of the head-up display
X
Adjust the seat accordingly (Y page 98).
X
On the driver's side, adjust the steering wheel
(Y page 102) and the exterior mirrors
(Y page 104).
X
Press memory button M and then press one of
the memory position buttons 1, 2 or 3 within
three seconds.
The settings are stored in the selected preset
position. A tone sounds when the settings
have been completed.
Calling up a stored setting
X
Press and hold the relevant memory position
button 1, 2 or 3 until the following compo-
nents are in the saved position:
Memory function
107
Seats, steering wheel and mirrors
Z
Loading ...
Loading ...
Loading ...