Loading ...
Loading ...
Loading ...
Display messages
Possible causes/consequences and MM Solutions
T !
÷
Inoperative SeeInoperative See
Operator's ManualOperator's Manual
EBD (electronic brake force distribution), ABS and ESP
®
are malfunc-
tioning.
Other driving systems and driving safety systems may also malfunc-
tion.
In addition, the ÷ and ! warning lamps light up in the instru-
ment cluster and a warning tone sounds.
G
WARNING
The brake system continues to function normally, but without the
functions listed above. The front and rear wheels could therefore lock
if you brake hard, for example.
The steerability and braking characteristics may be severely affected.
The braking distance in an emergency braking situation can increase.
If ESP
®
is not operational, ESP
®
is unable to stabilize the vehicle.
There is an increased risk of skidding and an accident.
X
Drive on carefully.
X
Visit a qualified specialist workshop immediately.
F (USA
only) ! (Canada
only)
Turn On the Igni‐
Turn On the Igni‐
tiontion toto ReleaseRelease thethe
Parking BrakeParking Brake
The red F (USA only) or ! (Canada only) indicator lamp lights
up.
You attempted to release the electric parking brake while the ignition
was switched off.
X
Switch on the ignition.
F (USA
only) ! (Canada
only)
PleasePlease ReleaseRelease Park‐Park‐
ing Brakeing Brake
The red F (USA only) or ! (Canada only) indicator lamp flashes
and a warning tone sounds. A condition for automatic release of the
electric parking brake is not fulfilled (Y page 155).
You are driving with the electric parking brake applied.
X
Release the electric parking brake manually.
The red F (USA only) or ! (Canada only) indicator lamp flashes
and a warning tone sounds.
You are using the electric parking brake for emergency braking
(Y page 155).
F (USA
only) ! (Canada
only)
Parking Brake SeeParking Brake See
Operator's ManualOperator's Manual
The yellow ! warning lamp lights up.
The electric parking brake is malfunctioning.
To apply:
X
Switch the ignition off.
X
Press the electric parking brake handle for at least ten seconds.
X
Shift the transmission to position j.
X
Consult a qualified specialist workshop.
230
Display messages
On-board computer and displays
Loading ...
Loading ...
Loading ...