Loading ...
Loading ...
Loading ...
piratory organs or clothing or be swallowed.
There is a risk of injury.
If you come into contact with the electrolyte,
observe the following:
R
Rinse off the electrolyte from your skin
immediately with water.
R
Immediately rinse the electrolyte out of
your eyes thoroughly with clean water.
R
If the electrolyte is swallowed, immediately
rinse your mouth out thoroughly. Do not
induce vomiting.
R
If electrolyte comes into contact with your
skin or hair or is swallowed, seek medical
attention immediately.
R
Immediately change out of clothing which
has come into contact with electrolyte.
R
If an allergic reaction occurs, seek medical
attention immediately.
The exterior mirror on the driver's side and the
rear-view mirror automatically go into anti-glare
mode if:
R
the ignition is switched on
R
incident light from headlamps strikes the sen-
sor in the rear-view mirror
The mirrors do not go into anti-glare mode if
reverse gear is engaged or if the interior lighting
is switched on.
Parking position for the exterior mir-
ror on the front passenger side
Storing the parking position
You can set the front-passenger side exterior
mirror such that you can see the rear wheel on
that side as soon as you engage reverse gear.
You can store this position.
Storing using reverse gear
:
Memory button M
;
Button for the exterior mirror setting
=
Button for the front-passenger side exterior
mirror
?
Button for the driver's side exterior mirror
X
Start the engine.
X
Press button =.
X
Engage reverse gear.
The exterior mirror on the front-passenger
side moves to the preset parking position.
X
Use button ; to adjust the exterior mirror to
a position that allows you to see the rear
wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another posi-
tion, the exterior mirror on the front-
passenger side returns to the driving position.
Saving using the memory button
You can store the parking position of the exte-
rior mirror on the front-passenger side using
memory button M :. The reverse gear must not
be engaged.
X
Turn the SmartKey to position 2 in the igni-
tion lock (Y page 131).
X
Press button =.
X
Use button ; to adjust the exterior mirror to
a position that allows you to see the rear
wheel and the curb.
X
Press memory button M : and one of the
arrows on button ; within three seconds.
The parking position is stored if the exterior
mirror does not move.
X
If the mirror moves out of position, repeat the
steps.
X
After successfully storing, reset the driving
position of the exterior mirror.
106
Mirrors
Seats, steering wheel and mirrors
Loading ...
Loading ...
Loading ...