Loading ...
Loading ...
Loading ...
X
Press : or 9 to select the DisplayDisplay
Unit Speed-/Odometer
Unit Speed-/Odometer function.
The current setting kmkm or MilesMiles appears.
X
Press the a button to save the setting.
The selected unit of measurement for distance
applies to:
R
Digital speedometer in the TripTrip menu
R
Odometer and the trip odometer
R
Trip computer
R
Current consumption and the range
R
Navigation instructions in the NaviNavi menu
R
Cruise control
R
Active Distance Assist DISTRONIC with Active
Steering Assist
R
ASSYST PLUS service interval display
Switching the additional speedometer
on/off
If the additional speedometer is switched on,
the speed is shown in the status bar in the mul-
tifunction display instead of the outside tem-
perature.
The speed display is inverse to the speedome-
ter.
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the SettingsSettings menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the InstrumentInstrument
ClusterCluster submenu.
X
Press a to confirm.
X
Using : or 9, select the AdditionalAdditional
Speedometer [km/h]Speedometer [km/h] function.
The current selection appears.
X
To activate/deactivate: press the a but-
ton again.
Restoring the factory settings
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the SettingsSettings menu.
X
Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the Factory
Factory
SettingsSettings submenu.
X
Press a to confirm.
The Reset All Settings?
Reset All Settings? function
appears.
X
Press : or 9 to select NoNo or YesYes.
X
Press a to confirm the selection.
If you have selected YesYes, the multifunction
display shows a confirmation message.
For safety reasons, the Daytime RunningDaytime Running
LightsLights function in the LightsLights submenu is only
reset when the vehicle is stationary.
AMG menu (Mercedes-AMG vehicles)
Warm-up
:
Digital speedometer
;
Gear indicator
=
Charge-air pressure
?
Engine oil temperature
A
Transmission oil temperature
X
Press the ò button on the steering wheel
to open the menu list.
X
Press the : or 9 button on the steering
wheel to select the AMGAMG menu.
X
Confirm by pressing a on the steering
wheel.
Engine and transmission oil tempera-
tures: when the engine and transmission are
at normal operating temperature, oil temper-
atures ? and A are displayed in white in the
multifunction display.
If the multifunction display shows oil temper-
ature ? or A in blue, the engine or the
transmission are not yet at normal operating
temperature. Avoid driving at full engine out-
put during this time.
Menus and submenus
223
On-board computer and displays
Z
Loading ...
Loading ...
Loading ...