Loading ...
Loading ...
Loading ...
3-3
INSP
ADJ
E
CONTROL SYSTEM
NOTE:
If the steering cable cannot be properly
adjusted at the steering column side, make
sure the steering cable at the jet pump side
is set to the specified length. Refer to
“REMOTE CONTROL CABLES AND SPEED
SENSOR LEAD” in chapter 8.
Throttle cable inspection and adjustment
NOTE:
Before adjusting the throttle lever free play,
adjust the trolling speed.
1. Measure:
● Throttle lever free play a
Out of specification → Adjust.
2. Adjust:
● Throttle lever free play
WARNING
The cable joint must be screwed in more
than 8 mm (0.31 in).
● Connect the cable joint and tighten the
locknut.
T
R
.
.
Locknut:
6 N • m (0.6 kgf • m, 4.3 ft • lb)
Throttle lever free play:
4–7 mm (0.16–0.28 in)
Adjustment steps:
● Loosen the locknut 1.
● Turn the adjuster 2 in or out until the
specified free play is obtained.
Turn in Free play is increased.
Turn out Free play is decreased.
● Tighten the locknut.
Loading ...
Loading ...
Loading ...