Loading ...
Loading ...
Loading ...
7-8
E
–+
ELEC
ELECTRICAL ANALYSIS
Test harness
NOTE:
● Make sure the output lead (red lead) of the
rectifier/regulator is disconnected when
measuring the peak voltage of the lighting
coil and rectifier/regulator.
● If the charge coil and pickup coil are mea-
sured unloaded, disconnect the test har-
ness on the output side coupler.
YW- 90890- Pin Usage
06779 06779 8 Charge coil and
pickup coil
Checking steps:
● Disconnect the coupler connections.
● Connect the test harness between the
couplers.
● Connect the tester terminals to the ter-
minals which are being checked.
● Run the engine and observe the mea-
surement.
Loading ...
Loading ...
Loading ...