Loading ...
Loading ...
Loading ...
7-34
E
–+
ELEC
INDICATION SYSTEM
Oil level gauge
1. Check:
● Oil level gauge
Not operating → Replace the multi-
function meter.
NOTE:
When inspecting the multifunction meter
unit or emptying the fuel tank, connect the
white/blue and black terminals (green two-
pin connector) with a jumper lead 1 to pre-
vent the fuel warning indicator from being
activated.
Checking steps:
● Supply DC 12 voltage to the white
four-pin connector (+: red, –: black)
with a battery.
● Disconnect the white two-pin connec-
tor (blue and black leads).
● Connect the blue and black terminals
with a jumper lead 2.
● Connect the green and red terminals
with a jumper lead 3.
NOTE:
If the jumper lead is installed for more
than 30 seconds, the display will auto-
matically turn off.
● Remove the jumper lead 2 from the
white two-pin connector.
● Disconnect the jumper lead 3 and
then connect it to green and red ter-
minal again.
● Make sure the oil symbol 4 and
“WARNING” lamp 5 blinks, and the
buzzer sounds intermittently.
WARNING
YAMAHA
8
7
6
5
4
3
2
1
MPH
FUEL
HOUR
x1000r/min
MULTI
DISPLAY
5
4
Loading ...
Loading ...
Loading ...