Loading ...
Loading ...
Loading ...
7-33
E
–+
ELEC
INDICATION SYSTEM
Fuel level gauge
1. Check:
● Fuel level gauge
Not operating → Replace the multi-
function meter.
NOTE:
When inspecting the multifunction meter
unit or emptying the oil tank, connect the
blue and black terminals (white two-pin
connector) with a jumper lead 1 to prevent
the oil warning indicator from being acti-
vated.
Checking steps:
● Supply DC 12 voltage to the white
four-pin connector (+: red, –: black)
with a battery.
● Disconnect the green two-pin connec-
tor (white/blue and black leads).
● Connect the white/blue and black ter-
minals with a jumper lead 2.
● Connect the green and red terminals
with a jumper lead 3.
NOTE:
If the jumper lead is installed for more
than 30 seconds, the display will auto-
matically turn off.
● Check the fuel level segments is full
indicated.
● Remove the jumper lead 2 from the
green two-pin connector.
● Disconnect the jumper lead 3 and
then connect it to green and red ter-
minal again.
● Make sure the fuel level segment 4,
fuel symbol 5 and “WARNING” lamp
6 blinks, and the buzzer sounds inter-
mittently.
RESET
WARNING
YAMAHA
8
7
6
5
4
3
2
1
MPH
FUEL
HOUR
x1000r/min
MULTI
DISPLAY
WARNING
YAMAHA
8
7
6
5
4
3
2
1
MPH
FUEL
HOUR
x1000r/min
MULTI
DISPLAY
6
5
4
Loading ...
Loading ...
Loading ...