Loading ...
Loading ...
Loading ...
8-7
E
HULL
HOOD
HANDLEBAR
SERVICE POINTS
Handlebar inspection
1. Inspect:
● Handlebar
Bends/cracks/damage → Replace.
Handlebar switch inspection
Refer to “IGNITION SYSTEM” and
“STARTING SYSTEM” in chapter 7.
Handlebar assembly installation
1. Adjust:
● QSTS cable length a
NOTE:
● Before adjusting the QSTS cables, set the
control grip to the neutral position.
● Adjust the QSTS cable lengths a to the
specified length and be sure to take up
any slack.
QSTS cable length:
77 ± 0.5 mm (3.03 ± 0.02 in)
2. Install:
● Upper handlebar holder 1
NOTE:
● Align the punch marks a on the handle-
bar with the top surface of the handlebar
holder.
● The upper handlebar holder should be
installed with the punch mark b facing
forward.
CAUTION:
Clearance c should be narrower than
clearance d.
Loading ...
Loading ...
Loading ...