Loading ...
Loading ...
Loading ...
• Do not overcook food. Carefully attend to appliance when Magic Bullet Cups are placed
inside an operating microwave.
• Some products, such as whole eggs, may explode and should not be heated using the
Magic Bullet cups in the microwave.
CLEANING INSTRUCTIONS
• DO NOT PUT THE CROSS BLADE IN THE DISHWASHER. HANDLE BLADES WITH CARE
AS THEY ARE SHARP! SIMPLY HAND WASH WITH WARM SOAPY WATER. IF NEEDED,
USE A DISHBRUSH TO LOOSEN DEBRIS. FOR FURTHER DISINFECTION, YOU MAY RINSE
THE BLADE USING A 10% SOLUTION OF VINEGAR AND WATER OR LEMON JUICE.
• THE MAGIC BULLET CUPS CAN BE WASHED ON THE TOP RACK OF THE DISHWASHER
USING THE NORMAL (NOT SANITIZE) CYCLE. THE MAGIC BULLET CUPS AND CROSS
BLADE SHOULD NOT BE STERILIZED IN BOILING WATER FOR ANY REASON AS THIS WILL
WARP THE PLASTIC.
• WHEN WASHING THE CROSS BLADE, DO NOT ATTEMPT TO REMOVE THE GASKET RING.
SIMPLY HAND WASH IN WARM SOAPY WATER. ATTEMPTED REMOVAL OF THE GASKET MAY
PERMANENTLY DAMAGE THE BLADE CONFIGURATION AND CAUSE LEAKAGE. IF IN TIME
A GASKET BECOMES LOOSE OR DAMAGED, PLEASE CONTACT CUSTOMER SERVICE FOR A
REPLACEMENT MAGIC BULLET BLADE HOLDER AT: 1-866-446-6352.
For the most part the Power Base doesn’t really get dirty, but if you neglect to twist the
blade on to the cup tightly, liquids can leak out and get into the base and activator buttons.
Here’s how to clean it up.
Step 1: The most important thing is to UNPLUG the Power Base
before cleaning!
Step 2: Make sure the blade is not attached to the Power Base.
Step 3: Use a damp rag to wipe down the inside and outside of the
Power Base.
• NEVER SUBMERGE THE POWER BASE IN WATER OR PLACE IT IN
THE DISHWASHER.
• Never put your hands or utensils near the moving blade and never use your
hands or utensils to press the activator buttons down while the Power Base is
plugged in.
• Periodically, the Power Base actuator tabs where the cup tabs insert may be
come soiled and sticky. To clean the actuators, first make sure the Power
Base is unplugged. Then, use a rag dampened with warm soapy water and
gently scrub the area, allowing the debris to dissolve completely and be wiped
away. For excessive soilage, you may use a 10% dilution of vinegar and water
to clean the area thoroughly.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
Loading ...
Loading ...
Loading ...