Loading ...
Loading ...
Loading ...
Voice Recognition
Nuance Voice Recognition
software is an advanced speech
recognition software used
to activate a wide variety of
functions on your phone.
Nuance software automatically voice activates up to
1,000 contacts for voice dialing and searching. No
pre-recording or training is needed. Speak a contact
name naturally to dial, and use your voice to look up
contacts, launch applications and navigate phone
menus.
1. From a Home screen, press Menu > Tools >
VoiceRecognition.
2. At the voice prompt, speak a command. The next
section lists the available commands.
Say a Command Options
•
Call <Name or #>: Dials a name or number listed
in your contact list. If multiple numbers exist (such
as home, work, or other) say the name and the
number type (location).
•
Send Message <Name or #>: Displays the SMS
(text message) screen.
•
Lookup <Name>: Use a voice command to locate
and display contact information stored in the
Contacts list.
•
Go To <Menu>: Accesses all the features of your
phone if they are activated, such as: Voice Mail,
Contacts, My Files, Calendar, Tasks, and Browser.
•
Check <Item>: Check your phone’s status in the
same report (Status, Messages, Missed Calls,
Time, Signal strength, Network, Battery, My Phone
Number, and Volume).
While the Say a Command screen displays you have
two options:
•
Tutorial: Provides examples of how to use the
voice commands.
•
Settings: Lists the settings for voice command
software such as: Confirmation, Adaptation, Audio
modes, Speakerphone, and About.
Speak clearly when saying your command. There is
no need to speak slowly or with added emphasis.
The voice recognition software has been optimized
to understand your speech in its natural form. If
it does not recognize your command after a few
seconds, a voice prompt asks you to repeat the
command. If it does not recognize your command
again, the following message displays “Sorry,
command not recognized,” and you are asked to try
again.
You must end your current Voice Commands call
before you can make another call using Voice
Commands. You can only originate the first call in a
3-way call using Voice Commands.
Voice Recognition Tips
•
Wait for the tone before you speak.
•
Speak clearly and at a normal volume.
•
There is no need to use paused speech. The
voice recognition software has been trained to
recognize natural speech, and performs best
when you speak naturally.
•
In very noise environments, it may be helpful to
use a headset or a Bluetooth headset.
Tools
84
Voice Recognition
Loading ...
Loading ...
Loading ...