Loading ...
Loading ...
Loading ...
68
To configure Trunk, go to the Management > Trunk page.
Follow the steps below to configure Trunk on this page:
1. Check the box to enable Trunk.
2. Select the trunk algorithm mode from the drop-down list. Three options are available:
SRC MAC+DST MAC, DST MAC and SRC MAC. Based on the selected algorithm mode,
the EAP determines which physical port is used to send out the received packet.
• With SRC MAC+DST MAC selected, the EAP determines the outgoing port based on
both the source and destination MAC addresses of the packet.
• With DST MAC selected, the EAP determines the outgoing port baesed on the
destination MAC address of the packet.
• With SRC MAC selected, the EAP determines the outgoing port based on the source
MAC address of the packet.
3. Click Save.
4.5 Configure LED
You can turn on or off the LED light of the EAP.
To configure LED, go to the Management > LED ON/OFF page.
Loading ...
Loading ...
Loading ...