User Manual - Page 330

For 2018 BMW 7 Series. Series: 7 Series

Loading ...
Loading ...
Loading ...
If the situation allows, wait in your vehicle
until the voice connection has been estab‐
lished.
The LED flashes green when a connection
to the BMW Response Center has been
established.
The BMW Response Center then makes
contact with you and takes further steps to
help you.
Even if you are unable to respond, the
BMW Response Center can take further
steps to help you under certain circum‐
stances.
For this, data is transmitted to the BMW
Response Center which serves to deter‐
mine the necessary rescue measures. E.g.,
the current position of the vehicle, if it can
be established.
Even if you can no longer hear the BMW
Response Center through the loudspeak‐
ers, the BMW Response Center may still
be able to hear you.
The BMW Response Center ends the Emer‐
gency Request.
What to do after an accident
Safety information
WARNING
Contact with live components can lead to
an electric shock. There is a risk of injuries or
danger to life. After an accident, do not touch
any high-voltage components such as orange
colored high-voltage cables or parts that are in
contact with exposed high-voltage cables.◀
WARNING
Fluids in the high-voltage battery are cor‐
rosive. There is a risk of injury. Do not touch
fluids escaping from the high-voltage battery.◀
General information
After an accident, compliance with the follow‐
ing safety precautions is required with regard
to the high-voltage system:
Secure the crash site.
Immediately notify rescue forces, police, or
firefighters of the fact that your vehicle is
equipped with a high-voltage system.
Engage selector lever position P, set the
parking brake and switch off operating and
drive-ready state.
Lock the vehicle after exiting.
Do not inhale any gases escaping from the
high-voltage battery; if needed, maintain a
safe distance from the vehicle.
Jump-starting
General information
If the battery is discharged, the engine can be
started using the battery of another vehicle
and two jumper cables. Only use jumper ca‐
bles with fully insulated clamp handles.
Vehicles with hybrid drive cannot be used for
jump-starting.
Safety information
DANGER
Contact with live components can lead to
an electric shock. There is a risk of injuries or
danger to life. Do not touch any components
that are under voltage.◀
WARNING
If the jumper cables are connected in the
incorrect order, sparking may occur. There is a
risk of injury. Pay attention to the correct order
during connection.◀
Seite 330
Mobility Breakdown assistance
330
Online Edition for Part no. 01402981865 - VI/17
Loading ...
Loading ...
Loading ...