Loading ...
Loading ...
Loading ...
loads on the power connection or prevents si‐
multaneous high power from multiple loads.
Removing the charging cable, refer to
page 279.
Continuing the charging process
If the charging process is interrupted, e.g.,
through a temporary power failure, the charg‐
ing process is automatically continued after
the interruption.
Terminating the charging process
1. Remove the charging cable from the vehi‐
cle, refer to page 279.
2. Stow the charging cable as required.
3. Close the charging socket flap.
4. Lock vehicle if it is unlocked.
Intelligent charging
Concept
Intelligent charging can adapt the charging
process dynamically via the Internet to the en‐
vironmental condition, such as the availability
of solar power or time-variable electricity rates.
Intelligent charging is part of BMW's Digital
Charging Service.
Further information about the Digital Charging
Service is available on the Internet:
https://charging.bmwgroup.com
General information
No time for the end of charging is displayed in
the instrument cluster for intelligent charging.
If drive-ready state is switched off, changes
can be made via iDrive.
Intelligent charging can be ignored for the next
charging process.
1.
"Charge immediately once"
Functional requirements
▷ Account on the BMW charging portal.
▷ A subscription to the intelligent charging
service has been obtained.
▷ Suitable Wallbox.
▷ Departure time set, refer to page 283.
▷ Charge current strength setting to highest
level, refer to page 281.
Configuring the BMW charging
service
Use one of the following to configure the
BMW charging service:
▷ BMW remote app on the smartphone.
▷ BMW charging portal in the Internet.
Activating intelligent charging
Via iDrive:
1.
"My Vehicle"
2. "Plan charging/climate control"
3. "Charge for departure time"
4. "Intelligent charging"
Displays in the instrument
cluster
The charge state indicator light, refer to
page 131, shows the charge state of the high-
voltage battery in the instrument cluster, if
standby state is switched on. If all bars are fil‐
led, the high-voltage battery is fully charged.
Even if no bars are filled, the high-voltage sys‐
tem is still under high voltage.
Information regarding the charging process are
shown on the charging screen, refer to
page 130.
Seite 282
Mobility Charging the vehicle
282
Online Edition for Part no. 01402981865 - VI/17
Loading ...
Loading ...
Loading ...