Loading ...
Loading ...
Loading ...
▷ Each time the rocker switch is pressed to
the resistance point, the desired speed in‐
creases or decreases by 1 mph/1 km/h.
▷ Each time the rocker switch is pressed
past the resistance point, the desired
speed changes by a maximum of 5 mph/
10 km/h.
The maximum adjustable speed depends
on the vehicle and the set hybrid system
characteristic, refer to page 112.
▷ Pressing the rocker switch to the resist‐
ance point and holding it accelerates or de‐
celerates the vehicle without requiring
pressure on the accelerator pedal.
After the rocker switch is released, the ve‐
hicle maintains its final speed. Pressing the
switch beyond the resistance point causes
the vehicle to accelerate more rapidly.
Continuing cruise control
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current
speed and stored speed is not too large before
calling up the stored speed. Otherwise, unin‐
tentional braking or accelerating may occur.
Press button with the system inter‐
rupted.
Cruise control is continued with the saved val‐
ues.
In the following cases, the stored speed value
is deleted and cannot be called up again:
▷ When the system is switched off.
▷ When drive-ready state is switched off.
Displays in the instrument cluster
Display in the speedometer
▷ Green marking: system is
active, the marking indicates
the desired speed.
▷ Orange/white marking: sys‐
tem is interrupted, the mark‐
ing indicates the stored
speed.
▷ No marking: system is switched off.
Indicator lamp
▷ Indicator lamp green: system is ac‐
tive.
▷ Gray indicator lamp: the system has
been interrupted.
▷ No indicator lamp: system is switched off.
Status display
The selected desired speed is hidden
after a brief time.
Displays in the Head-up Display
Some system information can also be dis‐
played in the Head-up Display.
The symbol is displayed when the set
desired speed is reached.
System limits
The desired speed is also maintained downhill.
The speed may not be maintained on uphill
grades if the engine power is insufficient.
In ECO PRO driving mode, the vehicle may ex‐
ceed or drop below the set desired speed in
some situations, for instance on downhill or
uphill grades.
Seite 194
Controls Driver assistance systems
194
Online Edition for Part no. 01402981865 - VI/17
Loading ...
Loading ...
Loading ...