Loading ...
Loading ...
Loading ...
The selected setting is stored for the driver
profile currently used.
Display in the instrument cluster
The system illuminates green: at least
one lane marking was detected and
warnings can be issued.
Warning function
If you leave the lane
If you leave the lane and if a lane marking has
been detected, the steering wheel vibrates in
accordance with the steering wheel vibration
setting.
If the turn signal is set before changing the
lane, a warning is not issued.
With side collision warning
If in the speed range up to 130 mph/210 km/h
a lane marking is crossed, the system inter‐
venes with a brief active steering intervention
in addition to vibrating. The steering interven‐
tion helps keep the vehicle in the lane. The
steering intervention can be noticed on the
steering wheel and can be manually overridden
at any time.
End of warning
The warning is canceled in the following situa‐
tions:
▷ Automatically after approx. 3 seconds.
▷ When returning to your own lane.
▷ When braking hard.
▷ When using the turn signal.
▷ If DSC Dynamic Stability Control inter‐
venes.
System limits
Safety information
WARNING
The system can react not at all, too late,
incorrectly, or without justification due to the
system limits. There is a risk of accidents or
risk of damage to property. Follow the informa‐
tion regarding the system limits and actively
intervene, if needed.◀
Functional limitations
The system may not be fully functional in the
following situations:
▷ In heavy fog, wet conditions, or snowfall.
▷ In the event of missing, worn, poorly visi‐
ble, merging, diverging, or multiple lane
markings such as in construction areas.
▷ When lane markings are covered in snow,
ice, dirt or water.
▷ In tight curves or on narrow lanes.
▷ When the lane markings are covered by
objects.
▷ When driving very close to the vehicle in
front of you.
▷ If there are constant blinding effects be‐
cause of oncoming light, for instance from
the sun low in the sky.
▷ If the field of view of the camera or the
windshield is dirty or covered in the area of
the interior mirror.
▷ If the camera has overheated and been
temporarily switched off due to excessively
high temperatures.
▷ Up to 10 seconds after the start of the en‐
gine via the Start/Stop button.
▷ During calibration of the camera immedi‐
ately after vehicle delivery.
A Check Control message is displayed when
the system is not fully functional.
Seite 177
Safety Controls
177
Online Edition for Part no. 01402981865 - VI/17
Loading ...
Loading ...
Loading ...