User Manual - Page 135

For 2018 BMW 7 Series. Series: 7 Series

Loading ...
Loading ...
Loading ...
Airbag system
Airbag system and belt tensioner are
not working.
Have the vehicle checked immediately
by a dealer’s service center or another quali‐
fied service center or repair shop.
Parking brake
The parking brake is set.
Release the parking brake, refer to
page 116.
Brake system
Braking system impaired. Continue to
drive moderately.
Have the vehicle checked immediately
by a dealer’s service center or another
qualified service center or repair shop.
Yellow lights
Anti-lock Braking System ABS
Braking force boost may not be work‐
ing. Avoid abrupt braking. Take the lon‐
ger braking distance into account.
Have the system immediately checked
by a dealer’s service center or another
qualified service center or repair shop.
DSC Dynamic Stability Control
The indicator light flashes: DSC con‐
trols the drive and braking forces. The
vehicle is stabilized. Reduce speed and
adapt driving style to the driving circumstan‐
ces.
The indicator light lights up: DSC has malfunc‐
tioned.
Have the system immediately checked by a
dealer’s service center or another qualified
service center or repair shop.
DSC Dynamic Stability Control, refer to
page 188.
DSC Dynamic Stability Control is
deactivated or DTC Dynamic Traction
Control is activated
DSC Dynamic Stability Control is deac‐
tivated or DTC Dynamic Traction Con‐
trol is activated.
DSC Dynamic Stability Control, refer to
page 188, and DTC Dynamic Traction Control,
refer to page 189.
Flat Tire Monitor FTM
The Flat Tire Monitor signals a loss of
tire inflation pressure in a tire.
Reduce your speed and stop cau‐
tiously. Avoid sudden braking and steering ma‐
neuvers.
Flat Tire Monitor, refer to page 307.
Tire Pressure Monitor TPM
The indicator light illuminates.
The Tire Pressure Monitor reports a
low tire inflation pressure or a flat tire.
Follow the information in the Check Control
message.
The indicator light flashes and then illuminates
continuously.
No flat tire or loss of tire inflation pressure can
be detected.
Interference caused by systems or devices
with the same radio frequency: after leav‐
ing the area of the interference, the system
automatically becomes active again.
TPM was unable to complete the reset.
Reset the system again.
A wheel without TPM wheel electronics is
mounted: have it checked by a dealer’s
service center or another qualified service
center or repair shop as needed.
Seite 135
Displays Controls
135
Online Edition for Part no. 01402981865 - VI/17
Loading ...
Loading ...
Loading ...