User Manual - Page 109

For 2018 BMW 7 Series. Series: 7 Series

Loading ...
Loading ...
Loading ...
Driving
Vehicle features and options
This chapter describes all standard, country-
specific and optional features offered with the
series. It also describes features that are not
necessarily available in your vehicle, e. g., due
to the selected options or country versions.
This also applies to safety-related functions
and systems. When using these functions and
systems, the applicable laws and regulations
must be observed.
Start/Stop button
Concept
Pressing the Start/Stop button
switches drive-ready state on or
off, refer to page 21.
Drive-ready state is switched on
when you depress the brake
pedal while pressing the Start/Stop button.
Pressing the Start/Stop button again switches
drive-ready state back off and standby state,
refer to page 21, is switched back on.
Drive-ready state cannot be switched on, as
long as the charging cable is connected, refer
to page 278.
Drive-ready state
Concept
The following are the different drive-ready
state variants:
Electric drive-ready state, refer to
page 110.
The vehicle is powered by the electric mo‐
tor.
Starting the combustion engine, refer to
page 110.
The vehicle is powered by the combustion
engine.
Safety information
DANGER
If the exhaust pipe is blocked or ventila‐
tion is insufficient, harmful exhaust gases can
enter into the vehicle. The exhaust gases con‐
tain pollutants which are colorless and odor‐
less. In enclosed areas, exhaust gases can also
accumulate outside of the vehicle. There is
danger to life. Keep the exhaust pipe free and
ensure sufficient ventilation.◀
WARNING
When driving in electric mode, pedes‐
trians and other traffic might pay less attention
to the vehicle due to the lack of engine noise.
There is a risk of an accident. Adjust driving
style to traffic conditions. Watch traffic closely
and actively intervene where appropriate.◀
WARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an ac‐
cident. Before exiting, secure the vehicle
against rolling.
In order to ensure that the vehicle is secured
against rolling away, observe the following:
Set the parking brake.
On uphill grades or on a downhill slope,
turn the front wheels in the direction of the
curb.
On uphill grades or on a downhill slope,
also secure the vehicle, e.g., with a wheel
chock.◀
Seite 109
Driving Controls
109
Online Edition for Part no. 01402981865 - VI/17
Loading ...
Loading ...
Loading ...