Loading ...
Loading ...
Loading ...
Without comfort rear seats: assembly
of LATCH child restraint fixing
systems
1. Install child restraint system, see manufac‐
turer's information.
2. Ensure that both LATCH anchors are prop‐
erly connected.
With comfort rear seats: assembly of
LATCH child restraint fixing systems
1. Before mounting, adjust the seats to their
basic position, refer to page 89.
2. For better accessibility, tilt the backrest
back slightly.
3. Install child restraint system, see manufac‐
turer's information.
4. Ensure that both LATCH anchors are prop‐
erly connected.
5. After mounting, move the backrest back up
slightly so that the child restraint system
rests lightly against the backrest.
Child restraint systems with tether
strap
Safety information
WARNING
If the upper retaining strap is incorrectly
used for the child restraint system, the protec‐
tive effect can be reduced. There is a risk of in‐
jury. Make sure that the upper retaining strap is
not guided across sharp edges and without
twisting to the upper retaining strap.◀
WARNING
If the rear backrest is not locked, the pro‐
tective effect of the child restraint system is
limited or there is none. In particular situations,
for instance braking maneuvers or in case of an
accident, the rear backrest can fold forward.
There is a risk of injuries or danger to life. Make
sure that the rear backrests are locked.◀
NOTE
The mounting points for the upper re‐
taining straps of child restraint systems are
only provided for these retaining straps. When
other objects are mounted, the anchors can be
damaged. There is a risk of property damage.
Only mount child restraint systems to the up‐
per retaining straps.◀
Anchors
The respective symbol shows the an‐
chor for the upper retaining strap.
Seats with an upper top tether are
marked with this symbol. It can be found on
the rear seat backrest or the rear window shelf.
Routing the retaining strap
1 Direction of travel
2 Head restraint
3 Hook for upper retaining strap
4 Anchor
5 Rear window shelf
6 Seat backrest
7 Upper retaining strap
Attaching the upper retaining strap to
the anchor
1.
Open the anchor cover.
2. Raise the head restraint.
3. Guide the upper retaining strap between
the supports of the head restraint.
Seite 107
Transporting children safely Controls
107
Online Edition for Part no. 01402981865 - VI/17
Loading ...
Loading ...
Loading ...