Loading ...
Loading ...
Loading ...
7
SAFETYINSTRUCTIONS
• In the event that no image appears
on the screen or no sound is heard,
stop using the product. Switch off the
product, unplug it from the power outlet
and contact our service center.Failure to
do so may cause fire or electric shock.
• Do not drop anything onto the product
or apply heavy pressure to it.
– This may cause injury to persons or
the product malfunction.
• It is recommended that you maintain a
distance of more than 1.5 - 3 times the
diagonal length of the screen between
your eyes and the screen.
– If you watch the screen at a close
distance for a long time, your
eyesight may become worse.
• When closing the door of the product,
be careful not to jam your finger.
– This may cause injury to persons or
the product malfunction.
• Do not block the light emitted from the
product’s lens with a book or a cover.
Long exposure to the light may melt or
burn the object, possibly causing fire.
In addition, the lens may be overheated
and the product may be damaged
by the reflected light. Stop projecting
temporarily or turn off the power.
• Do not start the product with volume high.
– High volume may damage hearing. Be
sure to lower the volume before turning
off the product. Raise the volume
gradually after turning on the product.
• When you go out, place the product out
of reach of pets or other animals, and
unplug it from the wall outlet.
– Otherwise, it may cause short circuit
and re.
• Do not use high voltage electrical
equipment near the projector, (e.g. bug
zapper).
– This may result in product
malfunction.
Cleaning
WARNING
• Do not spray water directly to the
product when cleaning. Do not allow
water to get into the product or do not
allow it to get wet.
– This may cause re or electric shock.
• In the event that smoke or a strange
smell comes out from the product or a
foreign object falls into the product, stop
using it. Switch off the product, unplug
it from the power outlet and contact our
service center.
– Otherwise, this may cause re or
electric shock.
• To remove dust or stains on the cover
glass, use an air spray or use a swab
or soft cloth to wipe the glass gently.
CAUTION
• Contact your seller or our service
center once a year to clean the internal
parts of the product.
– If you do not clean the Laser TV
for a long period of time, dust will
accumulate, which may cause re or
damage to the product.
• When cleaning plastic parts, such as
the product case, unplug the power
first and wipe with a soft cloth. Do not
spray with water or wipe with a wet
cloth. When cleaning the plastic parts,
such as the product case, do not use
cleanser, automobile or industrial
shiner, abrasive or wax, benzene,
alcohol, etc., which can damage the
product.
– This can cause re, electric shock
or product damage (deformation,
corrosion and damage).
Loading ...
Loading ...
Loading ...