Loading ...
Loading ...
Loading ...
35
SETTINGUPTHETV
UsingtheEdgeAdjFunction
EdgeAdj adjusts the right, left, top, and bottom width of the projected image if the
projected image and screen are not perpendicular to each other due to a tilted screen or
TV.
Because the EdgeAdj function may cause inferior screen image quality, use this fuction
only when it is not possible to set up the Laser TV at an optimal angle.
1
Go to SMART → Settings → OPTION → EdgeAdj.
2
Move to a point you want to adjust using the , , , (Up,Down,Left,orRight)
button of the Magic Remote Control and select the point by pressing the Wheel
(OK).
3
The four-way arrows , , , (Up,Down,Left,orRight) are shown around the
selected point.
4
The vertical and horizontal value of the point can be changed by pressing
the , , , (Up,Down,Left,orRight) buttons of the magic remote control.
5
Adjust the value of the point to the desired value and complete the adjustment by
pressing the Wheel(OK) button of the magic remote control.
– The vertical and horizontal value of each point is changed by 5 in Tuningmode, and
by 1 in FineTuningmode.
6
After all adjustments have been made, close the EdgeAdj function by pressing
the BACK button.
Loading ...
Loading ...
Loading ...