Loading ...
Loading ...
Loading ...
75
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the settings, click
the Save button.
5.4.1.5. Day & Night
Used to determine when black and white mode is turned on in a dark environment. Below is a screenshot of this menu:
• Color - always represents picture in color, does not use IR or black and white mode. Performs poorly in dimly lit areas unless
you are using the Starlight series cameras.
• Auto - Uses D&N Sensitivity setting to change between color mode and infrared and black and white mode.
• Black & White - Always sets picture to black and white, however when illumination is too dark it switches on IR mode.
• Sensitivity: This option allows the user to change the Day/Night Sensitivity of the camera. The three options are Low,
Middle, and High. The higher the sensitivity, the quicker the camera will change into another mode depending on the light
levels.
• D&N Delay: This dropdown box allows the user to set a delay in seconds for how long it takes to switch between Day and
Night modes. The values range from 2 seconds to 10 seconds.
To reset to default settings, click the Reset Defaults button. To refresh the screen, click on Refresh. To save the settings, click
the Save button.
5.4.1.6. IR Light
This menu allows the user to select whether the IR lights for night vision are on or off for the selected profile. Below is a
screenshot of this menu:
Loading ...
Loading ...
Loading ...