Loading ...
Loading ...
Loading ...
(456,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
1) Front of vehicle
2. Remove the bolt and washers.
1) Front of vehicle
A) Standard position
B) High downforce position
3. Adjust the angle of the rear wing. We
recommend that you adjust the angle to
the standard position for attaining both
stability at high speed and enhanced
handling.
1) Front of vehicle
4. Install the bolt and washers. While
holding the bolt with a TORX
®
wrench,
use a wrench, socket wrench or a similar
tool to install the washers and nut and to
tighten the nut.
Tightening torque:
2.2 lbf·ft (3.0 N·m, 0.31 kgf·m)
! After adjusting the angle
WARNING
Make sure that the bolts and nuts are
tightened securely. If they are not
tightened securely, the rear wing
may come off while driving, possibly
leading to an accident.
& CFRP (Carbon Fiber Rein-
forced Plastic) parts
Due to the properties of the carbon fiber
used in CFRP parts, the shade and density
of the carbon fiber weave may vary.
Driving tips/Rear wing (TYPE RA)
8-16
Loading ...
Loading ...
Loading ...