Loading ...
Loading ...
Loading ...
(389,1)
北米Model "A1700BE-B" EDITED: 2017/ 10/ 11
red zone. Also, if the engine revolutions
reach the specified number, the fuel
supply will be cut. In this case, perform
shift up operation.
! To deselect the manual mode
To deselect the manual mode, return the
select lever to the “D” position from the “M”
position.
& Shift lock function
The shift lock function helps prevent the
improper operation of the select lever.
. You cannot move the select lever with
the ignition switch in the “ON” position and
the brake pedal depressed.
. You cannot move the select lever from
the “P” position to any other position
unless the brake pedal is depressed.
Depress the brake pedal first, and then
operate the select lever.
. Only the “P” position allows you to turn
the ignition switch from the “ACC” position
to the “LOCK”/“OFF” position and remove
the key from the ignition switch.
. If you turn the ignition switch to the
“LOCK”/“OFF” position while the select
lever is in the “N” position, the select lever
may not be moved to the “P” position after
a period of time. Therefore, move the
select lever to the “P” position with the
brake pedal depressed soon after turning
the ignition switch to the “LOCK”/“OFF”
position.
! Shift lock release
If you cannot move the select lever, turn
theignitionswitchbacktothe“ON”
position then move the select lever to the
“P” position with the select lever button
pressed and brake pedal depressed.
If the select lever does not move after
performing the above procedure, perform
the following steps.
. When you cannot shift the select
lever from “P” to “N”:
Refer to “
Shift lock release using the shift
lock release button” F7-27.
. When you cannot shift the select
lever from “N” to “R”, “P”:
Within 60 seconds after placing the ignition
switch in the “ACC” position, move the
select lever to the “P” position with the
select lever button pre ssed and brake
pedal depressed.
If you must perform the above procedure,
the shift lock system (or the vehicle control
system) may be malfunctioning. Contact a
SUBARU dealer for an inspection as soon
as possible.
If the select lever does not move after
performing the above procedure, refer to
“Shift lock release using the shift lock
release button” F7-27.
! Shift lock release using the shift
lock release button
Perform the following procedure to release
the shift lock.
1. Apply the parking brake and stop the
engine.
2. Wrap the tip of a flat-head screwdriver
with vinyl tape or a cloth and use it to
remove the shift lock cover. The shift lock
release button is located under the shift
lock cover.
– CONTINUED –
Starting and operating/Continuously variable transmission
7-27
7
Loading ...
Loading ...
Loading ...